Yellow Artificial Turf

Yellow Artificial Turf

Good Quality artificial turf introduction artificial turf color is Green and brown.it has a gauge of 3/8''with 16tufts per dm,the density is 16800tufts per squremeter,the pile height is 25mm and 6600Dtex.The backing is made of polipropliene with a weight of 165g/m2.and...

Product Details

Introduction

The artificial turf is a synthetic grass-like synthetic fiber implanted in a woven base fabric with a fixed coating on the back for the lawn on the sports field, the garden floor and the green ground. Indicators for testing artificial turf after using turf glue: drying speed, water resistance, pullout force, stiffness, softness.

Technical parameters

Description

Yellow Artificial Turf

Item No.

WF-J

Yarn

PE+PP

Pile Height

25mm

Detex

6600

Gauge

3/8inch

Density

16800

Backing

PP+SBR Latex

Guarantee

5~8years

Our products can be customized according to your requirements.

图片26.jpg  

Application

golf putting green, landscape artificial turf , commercial artificial grass , garden lawn carpet , safety synthetic turf flooring football field artificial grass ,soccer artificial turf ,synthetic grass for soccer ,basketball court fake grass ,tennis court artificial flooring and other outdoor activities,and scape artificial turf , commercial artificial grass , garden lawn carpet

Advantages

1.Easy to shape and install .

2.Good water permeability.

3. Specification can be adjusted according to the customer’s requiest.

4.Durable and long uselife.

5.Best price with quality control.

6.Professional production lines and work team.

FAQ2  33.jpg

1. Clean up the venue

Remove debris, such as uneven and uneven terrain, repair and leveling

2. Laying the lawn

It is necessary to spread the natural drying time for a day, so that the lawn naturally expands and contracts, and the indentation folds that may be formed during the transportation process can be stretched and smoothed; the direction of the straws must be consistent, otherwise chromatic aberration will occur.

3. Cutting the lawn

Lay the turf according to the simple design drawings and make the adjacent turf overlap as much as possible.

4. Bonding the lawn

Use a brush and a scraper to evenly apply glue on the back of the turf and the joint cloth below it. When the glue to be applied is not sticky, press the rolled turf into the seam cloth by hand, so that the two sides are as close as possible without gaps. And beaten with a rubber hammer or with a foot.

5. Clean up the venue

Clean up the debris on the turf and check the flatness of the site. If wrinkles are found, use a utility knife to cut, trim the excess and re-bond.

34.jpg

Inquiry