Commercial artificial lawn can also be used as floor coverings when used, but the characteristics of artificial turf mats and suspended assembled floors are quite different. Although each has its own advantages, it seems that artificial turf mats are more affected. Some are welcome, of course, some occasions will require the use of suspended assembled flooring.
Thecommercial artificial lawn is made of high-quality materials and advanced work, so its tensile strength, firmness, flexibility, wear resistance, aging resistance, color fastness, etc. reach a very high level, so Even if it is used for a long time, it is not easy to be damaged, and its average service life has reached more than 10 years.
The design of commercial artificial lawn mats also adopts the principle of imitation ecology, so that the athletes' foot feeling on the mat and the rebound speed of the ball are very close to those on the natural lawn, and have good water permeability. It is precisely because of the above advantages that the use of artificial turf mats is becoming more and more extensive, gradually replacing the real lawns used in various fields.
Bonding process for commercial artificial lawn
1. The bottom surface of the turf to be bonded, the non-woven fabric, the joint cloth, etc. must be cleaned and the surface is dry and free of moisture.
2. The ambient temperature should be selected above 5 °C. It is not suitable for construction under rain and rainy weather. Otherwise, the bonding time will be too long or even non-stick.
Concrete construction process of commercial artificial lawn
Gluing: It is required to use a brush to apply a thick and even surface on the surface. Do not apply glue repeatedly, otherwise blistering may occur or even fall. The base fabric is coated with glue, and the thickness of the glue is strictly controlled. Note that the speed of the glue should be appropriate. When applying the glue, it should be applied to the two bonding surfaces to be bonded.
Bonding: According to the actual influence of temperature, humidity, pressure and other conditions at the time, the open time is reasonably controlled. Generally, within 10-30 minutes after the application of the glue, the glue reaches 80% to dry and the hand is not sticky. One-time alignment is required for bonding. Never move the bonded object back and forth after bonding.www.frengrassturf.com