The injection molding process and water permeability of the landscape turf are good

- Apr 20, 2019-

The injection molding process of the landscape turf is mainly to squeeze the plastic particles in the mold once and to bend the grass with a bending technique, so that the grass leaves can be equidistantly arranged in equal amounts, and the height of the blades Completely unified. Suitable for kindergartens, sports fields, balconies, greening, sand and other aspects.

The landscape turf is made of grass-like synthetic fibers, which are implanted on the woven base fabric, and the back is coated with a fixed coating for the artificial field on the sports field, leisure field, golf course, garden floor and green ground. .

The landscape turf can meet the high-intensity sports needs of 24 hours a day, with simple maintenance, rapid drainage and excellent site flatness. Artificial turf is widely used in special competition venues for hockey, baseball, and rugby, as well as public practice grounds for sports such as football, tennis, and golf, or as a ground paving to beautify indoor and outdoor environments.

The water seepage of the landscape turf is good, and the clean water can be drained 20 minutes after the heavy rain; the grass is muddy. The landscape turf is less maintenance and maintenance, and the maintenance of the turf is cumbersome. After the event, maintenance work such as rolling, replanting and irrigation is required. It is often necessary to kill insects.

Landscape paving has a short paving cycle, and grassland can only be used after a period of maintenance. The landscape turf has low requirements on the foundation and can be constructed on asphalt, cement and hard sand, and the turf is constructed on the land. Landscape grasses are used frequently and can be used at high frequencies around the clock.www.frengrassturf.com