Three used standard and basic classification of landscape artificial turf

- Sep 28, 2018-

Three used standard for landscape artificial turf.
1. Water resistance: Because the outdoor artificial turf needs to be drained, it is sure that the glue must waterproof. If the waterproof effect is not good, the artificial turf  will be shaking or cracking  in the later stage of the process.
2. Adhesiveness should be high: artificial turf is inseparable from glue during use. If the viscosity of the glue is not reached, the surrounding area and joints of the turf field will be curled. This kind of situation will not only Affecting the aesthetics of artificial turf, it will also seriously affect the life of its entire use.
3. The range of suitable temperature should be wide: when the artificial turf is used in the northern region, the low temperature can reach 39 degrees below zero, or even lower, so the glue of artificial turf must have certain cold resistance, while in the south In the process of using artificial turf, the large temperature can reach 60 degrees Celsius, so the high temperature resistance of the glue is also high.
The landscape artificial turf has the advantages of bright appearance, green and vivid seasons, good drainage performance, long service life and low maintenance cost. The quality requirements of the artificial turf movement system are mainly concentrated in three aspects: hardness, flatness and drainage slope.
There are three types of commonly used artificial turf foundations: asphalt foundation, cement foundation, gravel foundation, which type is mainly determined by local climate, budget and time. The asphalt foundation is especially suitable for the climate with large temperature difference in the north and low temperature in winter. At the same time, because of its high cost, it is not the most suitable basic type for warm and humid environment. The gravel foundation is easy to construct, low in cost and quick in drainage.