using and caking ability of Artificial turf

- Mar 14, 2019-

using and caking ability of Artificial turf

In the process of using artificial turf, the  experience degree depends to some extent on the quality of the turf. The later viewing degree and experience is closely related to the quality of the artificial turf. The site where artificial turf is laid needs flatness and compactness.

 

A special lap cloth is required to be placed on the joint surface of the artificial turf and fixed with steel nails. The steel nail head can not be raised. For paving the turf, use artificial lawn glue for artificial turf. Do not use inferior glue. Otherwise, the turf will crack and fall off in a short time, especially in the rainy southern region. The most important point is that the glue is environmentally friendly which affect the physical and mental health of you and your family.

 

 

The glue applied to the artificial turf should be thin and even, and should not be applied repeatedly. Otherwise, bubbles will appear, the bond will not be strong, or even fall. The bottom surface of the turf, the lap cloth, etc. should be cleaned and the surface should be dry and waterless. The adhesive should not be exposed for a long time. The construction temperature is preferably above 5 degrees. It is not suitable for construction in rainy and mild rainy days. Otherwise, the bonding time will be too long and the bonding strength will not reach the standard, and even cause non-stick phenomenon.www.frengrassturf.com