Synthetic lawns color is Green.it has a gauge of 5/8''with 16tufts per dm,the density is 10500tufts per square meter,the pile height is 50mm and 12000Dtex.The backing is made of polipropliene with a weight of 165g/m2.and with SBR Latex.
This kind of Synthetic lawns used in school football field,football club.Indoor or outdoor football field.It is Durable and widely used in sport football field.
Synthetic sports and lawns
The pile height,machine gauge and density could be specially made according to your demands.
2m*25m/roll or 4m*25m/roll,the length can customer-made for you
Standard loading quantity
1*20GP: 2500 to 3000 sqm
1*40GP: 5000 to 5500 sqm
1*40HQ: 5500 to 6000 sqm
How to install the grass?
Prepare Natural Ground for Artificial Turf ( If on cement floor, please start from 2)
1.Remove any existing grass with a flat shovel or turf cutter.
2.Compact the ground with a vibrating plate compactor.
3.Lay a non-woven cloth over the ground.
Lay the Artificial Grass
4.Cut the roll of artificial turf into lengths that fit the shape of your yard.
5.Lay the turf over the area in its permanent place. Make sure adjoining seams fit together without any visible gaps, but do not overlap them.
6.Cut the edges of the artificial turf to fit the edges of the lawn. Use a utility knife to cut the grass from its underside adhere the Joints.
7.Peel back the joints between the artificial grass strips along their length. Reveal enough of the underlying ground to fit the joint tape with an inch or two to spare on each side.
8.Lay the joint tape in the gap you have created so that, when laid, the seam between the two adjacent strips of artificial turf will run down its middle.
9.Paint the joint tape with the glue.
10.Lay the edges of the adjoining artificial grass pieces over the joint tape and adhesive so that they are in their original and permanent position. Weigh the joint down with sandbags.
11.Repeat for each of the joints in the turf. Options for Adhering the Edges of the Artificial Grass
12.Nail down the edges of artificial turf on natural ground.
13.Apply the joint tape around the edges of artificial turf laid over concrete. (See step 10) Spread the Infill if required.
14.Spread the recommended amount of infill evenly over the artificial grass.
15.Rake the infill over the artificial turf to work it underneath the surface.
16.Allow it to settle overnight.
17.Spread and rake in more infill if necessary, until the space between the sub layer and the bottom of the artificial grass is filled.
1.Free samples for quality check.
2.Professional and experienced workers
3.Consultancy: Consulting service ensure you have the most suitable production suggestions for sports and landscaping purposes. Our professional team is able to provide you with best solution.
4.Quality Control System: Rigorous quality test before shipping makes sure you receive high quality goods.
1.When can I get the price?
We usually quote within 24hours after we get your inquiry. If you are very urgent to get the price, please call us or tell us in email. We will regard your inquiry priority.
2. How can I get your sample for quality check?
After price confirmation, we will send samples to you. Clients needs to cover the freight cost.
3.How long do I expect to get samples?
Normally it takes 3-10 days and eventually it depends on express company you choose.
4.How does Grass drain when it rains?
There are drainage holes on our artificial grass surface. During the installation process, we adjust landscape grading with optimal drainage as a priority. If necessary, our team will implement surface drains for areas without natural drainage.
5.What maintenance will the artificial turf cost?
The only maintenance required is the removal of debris; this can be done using a leaf blower of stiff brush.