It gives excellent sports performance in all aspects. The system had been thoroughly tested in ball rebound, ball roll, shock absorption, deformation, friction and etc and proved to be with good performance professional football games.In order to make sure every inch of our Artificial Grass for Gateball is qualified and manufactured according to customers' requests, we have more than ten inspections at different stages from raw materials, half-done products to the finished products.
15mm grass stilt course lawn
Number of needles per square meter
4 meters or 2 meters
UV resistance index
DIN 53387 ≥6000 hr
235 g / square meter
1. 4 dynamic colors, Natural looking
2. Guarantee: 8-12 years, could be used outdoor/indoor
3. All weather use with good water permeability
4.100% recycled environment friendly
5. Good U.V. resistance, aging resistance, weather resistance, Soft Handfeel, Non-filling
6. Fire proof & drainage well
1. Has good resistance to UV and flame retardant.
2. Good drainage.
3. Long service life and easy maintenance.
4. There is no pollution to the environment.
Lawn pavement construction stage
In order to ensure the quality and flatness of artificial grass paving, in line with international rules, and to ensure the quality and perception of artificial grass in the future, the artificial grass paving sequence is as follows:
1. According to the drawings, put the line, find the vertical and horizontal axes of the site, determine the center position of the site, and set the boundary of the site.
2. The grass rolls are arranged in the order according to the drawings, without damage, no exposed foundation or wrinkling.
3. Spread the artificial grass and park it. After the semi-angel is stretched to the natural position, start the seam from one side to the other according to the long side of the site. In the process of seaming, be sure to pay attention to the positive and negative of the seam. In the case, the direction is the same. Use a special cutting tool to cut the adjacent overlapping parts of the turf and clean the scraps, while making the border white lines for use.
4. Lay a special seam belt on the foundation between the turf and apply special glue. During the rubber coating process, it must be evenly painted. After drying, it should be bonded. The adhesive joint is allowed to have a gap of 3mm. If the range is too large, obvious seam marks will appear. Bond the entire green lawn section in turn.
1. Focus on the old factory of the lawn. The factory has focused on the original materials for the past years, the first-hand grass, the first-hand materials, and the quality of the products to ensure the quality of production.
2. The factory cooperates with many logistics companies to reduce logistics costs, ensure the interests of customers, and sincerely consider customers.
3, the product related issues and installation instructions can contact customer service to solve, customer service received immediate reply, factory quality-oriented, integrity first.